JWELL-PVC Skinning (WPC) Foaming Board Extrusion Line
JWELL-PVC Skinning (WPC) Foaming Board Extrusion Line
Product Introduction

JWELL PVC foam board extrusion machine production line

image7.jpg

PVC foam board production lines are very widely used to produce advertising board, wood veneer, furniture-boards in kitchen or bathroom cabinet. which is hot selling world wide. There are two choices of the line, with or without co-extruder. which is according to each individual clients application field.  

PVC foaming board (1).jpg

1.Waterproof,anti-flame,anti-acid& akali,anti-moth,light weight,heat preservation,sound insulation,shock absorption.

2.The process same with wood, but manufacturing performance is much better than wood.

3. Ideal substitute for wood, aluminum,composite board, often used for bathroom cabinet board, decoration board, or advertisement board, etc.

image2.jpg


image1.jpg

Extrusion Mould T-die And SIEMENS PLC Touch Screen Control System
1. Die head with streamlined runner surface, two half mold body design, die head disassembly, easy to clean.
2. Manual fine tuning of elastic die lip or movable upper die lip design, extrusion thickness 0.3-30mm.products and can be adjusted according to the thickness of products.
3. To adapt to the melt flow of different viscosity to get uniform distribution.


image9.jpg

Calibration Forming Machine For PVC Foam Board
Number of set calibration boards: four or five pairs. Width of shaping board: 1500mm Finalize plate closure: cylinder drive, independent up and down control Plate cooling: water cooling, optimize the design of flow channel Longitudinal movement of setting machine: 0.75 kW reducer motor drive


image10.jpg

Cooling stacker with edge side cutting device
Haul-off machine for pvc foam board
Non-dust Cutting Machine And Automatic Stacker For PVC Foam Board


PVC foaming board (18).jpg

Machine technical Parameter
ModelCo-extrusion foamed board extrusion lineSkinning foaming board extrusion line
Production width1220~1560mm1220~1560mm
Production Thickness5-20mm/20-35mm5-20mm/20-35mm
Extruder ModelS]Z65/132、SJZ80/156S]Z80/156
Capacity (Max.)400-550kg/h300-450kg/h
Main Motor Power37kw/75kw75kw


Machine running video
End product application area

1.Use in making decorative Furniture including Bathroom Cabinet, Kitchen Cabinet, Wall Cabinet, Storage Cabinet, Desk, Table Top, School Benches, Cupboard, Exhibition Desk, Shelve in Supermarket and many furniture application
1) 3mm,5mm for the cabinet back panel.
2) 8mm for the bottom panel of drawer.
3) 12mm for the drawer frame and the internal shelf.
5) 15mm for the cabinet body, side panel or door panel.
6) 16mm,18mm for the sink cabinet of kitchen cabinet.
7) 18mm for door panel.
8) 25mm for door panel in case of routing.

2. Constructions and Real Estate :
Also use in Building sector such as Insulation, Shop Fitting, Interior Decoration, Ceiling, Paneling, Door Panel, Roller Shutter Boxes, Windows Elements and much more.

3.Advertising: Traffic sign, Highway signboards, signboards, Andy board,  Doorplate, Exhibition display, billboards, Silk screen.

4.Traffic & transit: Interior decoration for ship, steamer, plane, bus, train, metro; Compartment, Side step & rear step for vehicle.


金纬机械海宁型材2023_08_03.jpg



MESSAGE
SEND